Why You Should Be Using AMSOIL Right Now!

	The AMSOIL Warranty
	AMSOIL Series 2000-20W50 vs the Competition
	AMSOIL 15W-40 vs the Competition
	AMSOIL 3000
	AMSOIL on the Farm.
	AMSOIL in the Big Trucks
	Do oil additives really work?
	What Does Oil Do?
	How to Change over to AMSOIL.
	Why Synthetic Oil is So Good.
	Why you should be using AMSOIL Right Now.
	Inside Francis Ormiston's 500,000 MILE PICK UP.
	Results of New York City Taxi Test.
	How heat affects oil performance
	AMSOIL for Racing
	AMSOIL Air & Oil Filters

AMSOIL provides:

1. Superior Stability: You may lose about 1/5 the conventional oil you put in your engine because it boils off at engine operating temperatures. When that happens, oil consumption and engine deposits skyrocket, while wear protection and fuel economy plummet. AMSOIL 100% Synthetic Motor Oils don't boil off like conventional oils do. In fact, a recent laboratory test showed AMSOIL 100% Synthetic 10W-30 passed the stringent European volatility tests with an exceptional low volatility of 5.9%.
2. Superior Wear Protection: AMSOIL Synthetic Motor Oils provide a thick oil film every time your engine operates in high temperature, high speed or high load conditions, protecting your hard working engine from heat and wear.
3. Superior Fluidity: AMSOIL Synthetic Motor Oils' natural tenacity and anti-wear agents form a protective molecular layer on metal surfaces, protecting engines from initial start-up wear. And AMSOIL's cold temperature fluidity gets the oil flowing throughout the engine fast for ready protection, even in the bitter cold.
4. Superior Overall Economy: AMSOIL Synthetic Motor Oils are formulated so well, they can be used for 25,000 miles (35,000 miles with our new Series 2000 0W-30), or even more with oil analysis. That saves you money on oil and time on oil changes.
5. Superior Oxidation Resistance: AMSOIL Synthetic Motor Oils resist oxidation and sludge formation so they keep engines clean and working right.
6. Superior Operating Temperature Range: AMSOIL Synthetic Motor Oils reduce friction and heat more effectively than petroleum oils do. With AMSOIL, engines run cooler, wear less and get more horsepower and better mileage than they can with petroleum oils. And it doesn't matter if it's hot or cold outside. AMSOIL always helps engines run their best. AMSOIL remains stable in extreme heat and fluid in extreme cold.
7. Superior Fuel Mileage: Motorists may experience as much as 5% increase in their fuel mileage with AMSOIL Synthetic Motor Oils. By boosting a vehicle's mileage from 20 mpg to 21 mpg, at $1.20/gallon of gas, a motorist saves $72.00 over 25,000 miles.

Motorists may also use the AMSOIL TRIGARD program, which includes AMSOIL Synthetic Motor Oils and other fine AMSOIL products, to extend their oil drain interval safely to 100,000 miles and beyond. Considering we in the U.S. discard 1.1 billion gallons of oil each year, TRIGARD is real savings for our environment.

1. You will save money and enjoy better performance
2. You will save money on fuel and your equipment will have less friction. This means you will have more power and as a result you go farther on a gallon of fuel! (In some cases - i.e. with our new 0W-30 - as much as 15% to 30% farther!)
3. Your equipment will last longer (and at today's prices, equipment may cost 2 to 3 times as much as it did years ago.) You want it to last as long as possible! AMSOIL can increase that life expectancy by TWO times or more, which has to be figured as part of the oil savings!
4. With less repairs and breakdowns your equipment will "stay on the road (or in the field) and not be in the "shop" which also increases productivity!
5. Equipment runs far cooler (less friction, you know!) and is more reliable in extremely high temperatures. (as an example... you don't want that irrigation engine shutting down during the hottest part of the day when you need water the most!).
6. Easier starting even in extreme cold. With a cold pour point as low as 76 degrees BELOW zero your equipment will 'start like it is summer' even in the most extreme conditions! Gear boxes shift easier and warm up times are eliminated.
7. Oil changes can be extended to 25,000 miles and far beyond when using the AMSOIL BY-PASS FILTER and oil analysis! Some operators go as far as 200,000 miles between oil changes - and that is supported by oil analysis! When you use extremely high quality additives that don't break down and 7 different synthetic base stocks that don't cause gum, sludge, and other contaminates to form AND you keep the oil "squeaky clean" at all times and you back that up with oil analysis, you really don't need to change the oil!
8. Another benefit is less oil consumption. When your oil can stand extremely high temperatures with far less evaporation (volatility) oil consumption can be reduced by as much as 42% or more!
9. Disposal of used oil is becoming more and more of a problem every day (some areas CHARGE as much as 50 cents per quart to dispose of used oil - and it will be that way all over soon - thanks to the EPA). By changing the oil 8 times less frequently (and that is WITH-OUT our By-Pass Filters) there is far less oil 'dumped' back into our environment. If you use a By-Pass System you almost totally eliminate used oil!
10. SIMPLY, YOU SAVE MONEY IN EVERY WAY POSSIBLE! You save on repairs, you save on labor, you save on oil costs and you save on equipment replacement costs! In some cases savings can be 40% to 60%!

AMSOIL will save you money and give you the peace of mind that comes from using the best. Today's engines produce more power from a smaller radiator and a smaller volume of oil to cool and lubricate them. They need more protection from heat than conventional oils give them. Conventional oils keep engines from failing most of the time, but there's a big difference between marginal failure prevention and total wear protection that AMSOIL delivers!